Monday, May 13, 2013

Creating Vertical Section View in AutoCAD MEP

Vertical section is the section created by using a vertical plane passing through the object to be sectioned. To create a vertical section in AutoCAD MEP, choose the Vertical Section tool from the Section & Elevation panel of the Home tab in the Ribbon of AutoCAD MEP; you will be prompted to specify the start point of the section line. Click in the drawing area to specify the start point of the section; you will be prompted to specify the next point of the section line. Click in the drawing area to specify the end point of section line; you will be prompted again to specify the next point for the section line. Press ENTER at the command prompt; you will be prompted to specify the length of the bounding box. Enter the length of the section area at the command prompt; the section line will be created. Below figure A shows a drawings with the section line created and figure B shows the same drawing with section view created.


Other Related AutoCAD MEP Posts
Workflow of HVAC System in AutoCAD MEP

Introduction to HVAC system in AutoCAD MEP

CADCIM Technologies announces the release of AutoCAD MEP 2014 for Designers textbook



1 comment:

Thanks for reading the post

Note: Only a member of this blog may post a comment.